This is a hands-on hardware workshop. Please fill out the background form so we can group you and prep the right tools (takes 1 min):

https://jsjform.com/f/VuGBui

Final spots are confirmed via form review, not first-come-first-served on Luma. muShanghai Pass holders get priorit

y.ROBOTO Hands-On: Panel × Workshop — Build & Deploy a Real Humanoid Robot

Humanoid robots, open-sourced down to the screws. RoboParty engineers walk you through the full hardware-to-algorithm pipeline — from assembly to live deployment.

【What you'll do】

- Panel: 3 talks on industrial design, hardware selection, and open-source humanoid ecosystems

- Workshop: Assemble real ROBOTO Origin modules (joint modules + shell) with engineer guidance

- Coding: Run the full pipeline — motion capture → imitation learning → deployment

- Watch the robot you just built execute your recorded motion

【Format】Panel + Workshop combined, 2 hours. Engineers on site guiding step-by-step. ROBOTO Origin components are real production modules — not simplified or instructional versions.

【What to bring】Laptop (Linux or Mac preferred, ROS2 experience a plus). Tools, parts kits, power supplies, and debugging equipment provided.

【Who should come】ML / controls / embedded engineers, hardware founders, university lab researchers, developers who want to actually touch a humanoid robot

【About ROBOTO Origin】RoboParty's fully open-source bipedal humanoid prototype: 1.2m, 30kg, 3m/s running speed. Open-sourced across structure, electronics, training framework, and deployment. Community 2000+ members, 1.4K+ GitHub stars, reproduction cost under ¥35,000.

【Note】muShanghai Pass required. Free and open, no cap.

---

本次 Workshop 为硬件实操环节，需提前填写背景问卷以便分组和准备工具，1 分钟完成：

https://jsjform.com/f/VuGBui

最终名额以问卷审核为准，非 Luma 先到先得。muShanghai Pass 持有者优先。

ROBOTO 实操工坊：Panel × Workshop — 组装一台真正的人形机器人，并让它动起来

开源到螺丝的人形机器人。RoboParty 工程师带你走完从硬件组装到算法部署的完整链路。

【Panel 三话题】

- A：人形机器人本体设计历程，人机未来与城市空间应答

- B：机器人从训练到部署全流程 — 传感器选型与整机调试

- C：开源生态的价值与路径 — RoboParty 社区愿景

【Workshop 你将做什么】

- 在工程师指导下组装 ROBOTO Origin 真实模组（关节模组 + 无外壳真机）

- 跑通完整 pipeline：模仿学习训练 → 部署到真机

【活动形式】Panel + Workshop 合并，3 小时一气呵成。工程师全程指导。使用的是 ROBOTO Origin 真实模组组件，非简化教学版本。

【你需要准备】笔记本电脑（Linux / Mac 为佳，有 ROS2 经验加分）。组装工具、零件套件、电源、调试设备由主办方提供。

【适合谁】ML / 控制 / 嵌入式工程师、硬件方向创业者、高校及实验室研究人员、想亲手拆装人形机器人的开发者

【关于 ROBOTO Origin】RoboParty 2026年1月发布的全栈开源双足人形机器人：身高1.2米，体重30公斤，跑速3m/s。硬件结构、电气电控、训练框架、部署系统全栈开源。社区 2000+ 人，GitHub 1.4K+ stars，整机复刻成本压缩至 3.5 万元以内。

【注意】需持有 muShanghai Pass 入场。免费开放，不限人数。